Svea is Sweden's new oceangoing research vessel, she is especially adapted for research and environmental monitoring in the Baltic Sea, Kattegat, Skagerak and Öresund. Svea is built 2017-2019 by Armon Shipyards in Vigo, Spain, and has been designed by Skipsteknisk AS in Ålesund, Norway. The vessels main activity is ecosystem investigation with a focus on recurrent monitoring of fish stocks and water quality, by SLU and SMHI.
The vessel is also used for
- data collection for studies and understanding of climate change effects
- mapping and monitoring of marine biodiversity
- mapping and monitoring of eutrophication
- measurements of CO2 and the resulting acidification of the oceans
- measurements of oxygen and de-oxygenation of the oceans.
DNV +1A1, E0, ICE-1B, DYNPOS-AUTS, SPS, TMON, BWM-T, COMFC(2)V(2), CLEAN, NAUT-AW
- Length over all 69.50 m
- Length between p.p. 64.20 m (length between perpendiculars, the length of the ship along the waterline)
- Breadth moulded 15.80 m
- Depth to lower deck 5.90 m
- Depth to main deck 8.60 m
- Design draft 5.40 m
- Gross tonnage 3 125 GT
- Economy speed: 11 knots
- Max speed: 13.5 knots
Total complement: 28 persons
Main propulsion system
Diesel electric propulsion plant
- Two AC electric motors in tandem, each 1 000 kW, 0-145 rpm, reversible.
- One fixed pitch propeller, 3 600 mm.
Side and azimuth thrusters
Maneuvering thrusters, make Brunvoll AS
- One FU74LTA2000 tunnel thruster in bow, 600 kW
- One AR63LNA1650 retractable azimuth thruster in bow, 860 kW
- One FU63LTA1550 tunnel thruster in stern, 600 kW
Winches, cranes, handling equipment
Electric winches, make Ibercisa
- Heave compensated winches with steel armoured cable for optic fiber and two conductors, ø11.5 mm
- CTD winch, 1 500 m, SWL (Safe Working Load) 15 kN
- Multi-purpose winch, 3 000 m, SWL 30 kN
- Fish towing winch, 300 m, SWL 30 kN
- Hydrographic winch, 1 500 m - ø6 mm stainless wire, SWL 15 kN
- Multi-purpose winch, 1 500 m, ø16 mm synthetic wire, SWL 120 kN
- Movable deck winch, 300 m, ø30 mm synthetic wire, SWL 30 kN
- 2 x trawl winches, 2 500 m, ø26 mm, SWL 290 kN
- 2 x net drums, 2x10,4 m3, SWL 170 kN
- Auxiliary winch, 100 m, ø20 mm, SWL 10 kN
- Net sounder winch, 3 500 m, ø11 mm, SWL 15 kN
- 2 x trawl door winches, 600 m, ø28 mm, SWL 25 kN
Deck cranes and frames, make Triplex
- 6.0 t/ 12 m knuckle boom crane with net roller, SB trawl gallow
- 2.0 t/ 13.5 m knuckle boom crane. PS trawl gallow
- 2.0 t/ 12 m knuckle boom crane. On bow deck
- A-frame 8 t SWL at stern
- Telescopic boom 1.5 t SWL, SB side
- CTD davit 1.5 t SWL, in CTD hangar
The vessel is fully equipped for demersal trawling as well as pelagic trawling with:
- GOV-trawl (grand ouverture vertical)
- pelagic Fotö-trawl
- Fish lab
sorting and analysis of fish
- MIK/instrument lab
handling of instruments and analysis of fish larvae and plankton
- Flex lab
handling of instrument platforms and sediment samples
- Wet lab
sampling of plankton, water and sediment
- CTD lab (hangar)
handling of water with CTD rosette
- Chemical lab
for analysis and management of data from water samples
- Nutrient analysis lab
for analysis of nutrients
- Isotop lab
handling of samples using radioactive substances
Underwater Acoustic Instrumentation from Kongsberg Simrad
- Scientific echosounder (EK80, 10-500 kHz), in drop keel and in ROTV (Focus 2), remotely operated towed vehicle.
- Multibeam sonar (MS70), in drop keel.
- Multibeam echo sounder (ME70), in drop keel.
- Long range, low frequency fish finding sonar SX90 (20-30 kHz)
- High resolution, high frequency fishery sonar SH90 (110-120 kHz)
- HI-PAP and underwater navigation system for acoustic positioning and navigation of e.g. remotely operated underwater vehicles, (SSBL/USBL)
ADCP (Acoustic Doppler Current Profiler) from Teledyne Marine
ADCP:s measure currents with sound waves.
Remotely Operated Towed Vehicles from MacArtney
- Model Triaxus is used for CTD profiling and is designed to undulate between 1 and 350 meters.
- Model Focus 2 is used for echo sounders and can be held at a fixed depth.
Other Scientific Equipment
- Specially designed CTD with water sampling rosette with sensors for e.g. oxygen and fluorescence
- Scientific work boat, Alukin C 750, 8 persons
- Towed video camera for counting burrows of Norwegian lobster, bottom living animals and habitats
- Moving vessel profiler - system for automatic CTD and fluorescence profiles underway, from AML Oceanographic, model MVP200
- Ferrybox - system for automatic water samplings and continous measurements of water parameters in the water at a depth of about four meters
- Weather station from Vaisala with sensors for meteorology, radiation, water surface temperature and sea colour
- The vessel is prepared for using a ROV (remotely operated underwater vehicle) that can be operative at a depth of down to 3,000 meters. The ROV will be taken onboard as a container module. The ROV of University of Gothenburg's Sven Lovén Centre for Marine Infrastructure.
- Integrated Bridge System, Furuno
- Dynamic Positioning (DP I), Kongsberg Maritime
- Automatic Identification System (AIS), Kongsberg Maritime
- Engine Monitoring System, Siemens
- ICAS, Siemens
- One MOB (Man Over Board) boat, port side with davit
- Life raft capacity 3x16 persons each side
The vessel is arranged with a passive controlled U-shaped anti-rolling tank system.
- Fuel oil 241 m³
- Potable water 149 m³
Environment and noise
In order to avoid disturbing fish and other organisms in the sea, and to minimize interference with the sensitive sonars, Svea is built to minimize radiated noise from the ship in accordance with recommendations from the International Council for the Exploration of the Sea (ICES 209).
The vessel is as environmentally friendly as possible with the technology that is commercially available today, for example
- by using renewable HVO-diesel to run the diesel generation plant
- the work boat's outdoor motor runs on diesel to minimize fire hazard and allow usage of HVO-diesel
- a large scale particle filter and urea to minimize emissions of particles
- the hull is painted with a silicone based paint that minimizes fouling without any toxic substances
- black water and grey water is cleaned in an sewage treatment plant and subsequently stored in a black water holding tank. Water from laboratories will also be led there. The water in the holding tank is so clean that it can be discharged into the sea anywhere. But Svea's sewage water will be emptied into Lysekil municipal sewage system when Svea is in here home port
- Svea's ballast water is cleaned, i.e. micro organisms will be killed, when the ballast tanks are emptied
- heat exchangers use sea water for cooling
- Svea is connected to district heating and the electricity grid in the home port Lysekil
- sustainable Elondo wood has been used on the work deck
- specific chemicals and substances are banned
- textiles are eco-labeled.
A requirement in the procurement process was that the shipyards had to be environmentally certified according to ISO 14001.
Call sign and MMSI
- Call sign: SEYB
- MMSI: 265009000
- IMO: 9829332
- The scientific work boat's MMSI is 265813630
Every vessel is assigned a call sign to be used in all voice communication over radio.
MMSI stands for Maritime Mobile Service Identifier and is a number that identifies the specific ship.
The IMO number is a unique ID number that is assigned to propelled, sea-going ships of 100 GT and above, with some exceptions. The number is never changed and never reassigned to another ship.